Differences Between Media Blasting and Chemical Stripping

Media Blasting is a very powerful yet low-cost form of soft abrasives that can be used on almost all surfaces to remove loose dirt, debris, and grit from them. In many cases, it is the simplest form of soft abrasives available. This kind of blasting can also eliminate the need for mechanical "scraping".

Media blasting is also known as soft grit blasting or media blasting. It is the process of using fine-grained media (sometimes referred to as grit) to remove the top layer of any surface, including painted and unpainted surfaces. The term media is a combination of the words media and 'blasting'. Grit is coarse gravel, similar to sand, that is used for polishing surfaces.

Soft grit media blasting occurs when fine dust of sand (the grit) is blown over the rough or uncoated surface to be worked. In the case of this procedure, there is no need to roughen the surface before blasting. Instead, the rough surface is roughed in advance to accept the larger particles of sand. This allows the workpiece to accept the larger-sized media after it is formed during the actual media blasting process. This method of sanding is often used to remove the majority, if not all, of the finish layer from the opposite or adjacent face of a piece of steel, stainless steel, or copper pipe for example. Discover more facts about pressure washing at http://edition.cnn.com/2008/LIVING/wayoflife/08/01/aa.things.not.to.do.in.car/index.html?_s=PM:LIVING.

When it is used to remove a dull or damaged finish from steel, this type of sanding is referred to as abrasive media blasting. It is often the first step in polishing a steel object to bring it back to life. Because the media used is so fine and the grit used is so large, this method of sanding also removes virtually all of the top coating as well. Instead, the surface that is left after the abrasive media blasting is used to polish the surface is usually very smooth. Get more info.

While media blasting and chemical stripping share many similarities, there are also important differences. Although both techniques can create a highly smoothed and restored surface, there are some important differences in the way each method of sanding and the finishing process are done. When using a pressure washer for media blasting, the finished product will have a clean and very similar appearance to that of a flat or altered product. Be sure to view here for more details!

Chemical stripping, on the other hand, often creates a much rougher and more uniform finish. This is achieved by spraying a highly abrasive mixture onto the surface to be treated. This includes an acid (such as hydrochloric acid) or hydrofluoric acid, which is also sometimes included in the air compressor air filter to achieve the same results. The air compressor provides the power to shoot the chemical through an abrasive blast tube and into the metal. After the compound has been shot into the metal, the scrubbing is accomplished by scrubbing the abrasives along the surface with the air compressor. Because of the high pressures generated during the process, it is important that you use the right air compressor for media blasting and chemical stripping to ensure a successful project.

All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly